Publications - Complete List

Journal articles - refereed

  1. Perkins, E.L. and Batchelor, W.J., - Water interaction in paper cellulose fibres as investigated by nmr pulsed field gradient, Carbohydrate Polymers, 87:361 (2012). Paper.
  2. Su, J., Mosse, W.K.J., Sharman, S., Batchelor, W., and Garnier, G., - Paper strength development and recyclability with polyamideamine-epichlorohydrin (pae), Bioresources, 7(1):913 (2012). Paper.
  3. Lestiani, R., Batchelor, W., and Banham, P., - Investigation of lint particle adhesion in offset printing using weibull statistics, Journal of Adhesion Science & Technology, Accepted (2012). Paper.
  4. Zhang, L., Batchelor, W., Varanasi, S., Tsuzuki, T., and Wang, X., - Effect of cellulose nanofiber dimensions on sheet forming through filtration, Cellulose, 19(2):561 (2012).Paper.
  5. Varanasi, S., Chiam, H.-H., and Batchelor, W.J., - Application and interpretation of zero and short-span testing on nanofibre sheet materials, Nord. Pulp Pap. Res. J., 27(2):343 (2012). Paper.
  6. Joshi, K.V., Batchelor, W.J., and Rasd, K., - Investigation of the effect of drying and refining on the fiber-fiber shear bond strength measured using tensile fracture line analysis of sheets weakened by acid gas exposure, Cellulose, 18(6):1407 (2011). Paper.
  7. Hilder, M. and Batchelor, W., - Surface-sensitive method to determine calcium carbonate filler contents in cellulose matrices, Cellulose, 17(2):407 (2010). Paper.
  8. Batchelor, W. and Sudarno, A., - Characterisation of lint particle removal in offset printing with weibull statistics, Journal of Adhesion Science & Technology, 24:619 (2010). Paper.
  9. Batchelor, W.J., - Applications of an analytical method to calculate the load distribution along a fibre in a loaded network, Appita J., 63(4):287 (2010). Paper.
  10. Gujjari, C., Batchelor, W., Sudarno, A., and Banham, P., - The relationship between tack and linting in the offset printing of newsprint grades, TAPPI J., 8(8):4 (2009). Paper.
  11. Lundin, T., Batchelor, W., and Fardim, P., - Fiber trapping in low-consistency refining: New parameters to describe the refining process, TAPPI J., 8(10):13 (2009). Paper.
  12. Batchelor, W.J., - An analytical solution for the load distribution along a fibre in a nonwoven network, Mechanics of Materials, 40(12):975 (2008).Paper
  13. Lundin, T., Batchelor, W.J., and Fardim, P., - Fibre trapping in low consistency refining: New parameters to describe the refining process, Tappi, 5(8):31 (2008). Paper
  14. Batchelor, W., Kibblewhite, R.P., and He, J., - A new method for measuring rba applied to the page equation for the tensile strength of paper, Appita J., 61(4):302 (2008).Paper.
  15. Voltaire, J., Gujjari, C., Batchelor, W., and Fogden, A., - Acoustic emission and tack of heat-set inks during setting on mwc-papers and fountain solution emulsification, Nordic Pulp Paper Res. J., 22(4):432 (2007).Paper
  16. He, J., Batchelor, W.J., and Johnston, R.E., - An analytical model for number of fibre-fibre contacts in paper and expressions for relative bonded area (rba), J. Mat. Sci., 42:522 (2007).Paper
  17. Voltaire, J., Batchelor, W., Fogden, A., Sudarno, A., and Banham, P., - New technique for monitoring ink-water balance on an offset press, Appita J., 60(2):120 (2007).Paper
  18. Sudarno, A., Batchelor, W., Banham, P., and Gujjari, C., - Investigation of the effect of press and paper variables on linting during the offset printing of newsprint, TAPPI J., 6(9):25 (2007).
  19. Batchelor, W.J., Westerlind, B.S., Hagglund, R., and Gradin, P., - Effect of test conditions on measured loads and displacements in zero span testing, TAPPI J., 5(10):3 (2006).Paper
  20. Sudarno, A., Gujjari, C., Rand, S.F., Janko, P., Batchelor, W., and Banham, P., - Comparison of size distributions of lint particles from different printing operations., Appita J., 59(5):385 (2006).
  21. Batchelor, W.J. and Kibblewhite, R.P., - Calculation of relative bonded area and scattering coefficient from sheet density and fibre shape, Holzforschung, 60(3):253 (2006).
  22. Batchelor, W.J., Lundin, T., and Fardim, P., - A method to estimate fibre trapping in low consistency refining, TAPPI J., 5(8):31 (2006).
  23. Batchelor, W.J., He, J., and Sampson, W.W., - Inter-fibre contacts in random fibrous materials: Experimental verification of theoretical dependence on porosity and fibre width, J. Mat. Sci., 41:8377 (2006).
  24. Batchelor, W.J. and He, J., - A new method for determining the relative bonded area, Tappi J., 4(6):23 (2005).
  25. Wathen, R., Batchelor, W., Westerlind, B., and Niskanen, K., - Analysis of strains in the fracture process zone, Nordic Pulp Paper Res. J., 20(4):393 (2005).
  26. Batchelor, W.J., Wu, Z., and Johnston, R.E., - Measurement of z-direction moisture transport and shrinkage in the drying of paper, Appita J., 57(2):107 (2004).
  27. He, J., Batchelor, W.J., and Johnston, R.E., - A microscopic study of fibre-fibre contacts in paper, Appita J., 57(4):292 (2004).
  28. Batchelor, W.J., - Determination of load-bearing element length in paper using zero/short span tensile testing, TAPPI J., 2(8):3 (2003).Paper.
  29. Batchelor, W.J. and Wanigaratne, D.M.S., - A new cyclic loading method for measuring sheet fracture toughness, Int. J of Fracture, 123(1-2):15 (2003).
  30. He, J., Batchelor, W.J., and Johnston, R., - The behaviour of fibers in wet pressing, TAPPI J., 2(12):27 (2003).
  31. He, J., Batchelor, W.J., Markowski, R., and Johnston, R.E., - A new approach for quantitative analysis of paper structure at the fibre level, Appita J., 56(5):366 (2003).
  32. Batchelor, W.J. and Westerlind, B.S., - Measurement of short span stress-strain curves of paper, Nordic Pulp & Paper Research Journal, 18(1):44 (2003).
  33. Wanigaratne, D.M.S., Batchelor, W.J., and Parker, I.H., - Comparison of fracture toughness of paper with tensile properties, Appita J., 55(5):369 (2002).
  34. Batchelor, W.J., - Effects of flocculation and floc trapping on fibre treatment in low-consistency refining, J. Pulp Paper Sci., 27(7):249 (2001).
  35. Long, J.M., Conn, A.B., Batchelor, W.J., and Evans, R., - Comparison of methods to measure fibril angle in wood fibres, Appita J., 53(3):206 (2000).
  36. French, J., Conn, A., Batchelor, W., and Parker, I., - The effect of fibre fibril angle on some handsheet mechanical properties, Appita J., 53(3):210 (2000).
  37. Wanigaratne, D.M.S., Batchelor, W.J., Conn, A.B., and Parker, I.H., - Image analysis of plastic deformation in the fracture of paper, Appita J., 53(6):471 (2000).
  38. Conn, A.B. and Batchelor, W.J., - Conversion of an instron to mechanical testing of single fibres, Appita J., 52(4):290 (1999).
  39. Batchelor, W.J., Kure, K.A., and Ouellet, D., - Refining and the development of fibre properties, Nordic Pulp Paper Res. J., 14(4):285 (1999).
  40. Wu, Z.Q., Batchelor, W.J., and Johnston, R.E., - Development of an impedance method to measure the moisture content of a wet paper web, Appita J., 52(6):425 (1999).
  41. Pleasants, S., Batchelor, W.J., and Parker, I.H., - Measuring the fibril angle of bleached fibres using micro-raman spectroscopy, Appita J., 51(5):373 (1998).
  42. Martinez, D.M., Batchelor, W.J., Kerekes, R.J., and Ouellet, D., - Forces on fibres in low-consistency refining - normal force, J. Pulp Paper Sci., 23(1):J 11 (1997).
  43. Batchelor, W.J., Martinez, D.M., Kerekes, R.J., and Ouellet, D., - Forces on fibres in low-consistency refining - shear force, J. Pulp Paper Sci., 23(1):J 40 (1997).
  44. Batchelor, W.J., Conn, A.B., and Parker, I.H., - Measuring the fibril angle of fibres using confocal microscopy, Appita J., 50(5):377 (1997).
  45. Batchelor, W.J., Finlayson, T.R., and Kelly, G.L., - Monoclinic phase measurement in mg-psz using x-ray diffraction, Journal of the American Ceramic Society, 79(9):2477 (1996).
  46. Batchelor, W.J., Finlayson, T.R., and Gross, A.K., - Contributions of transformation and microcracking to the plastic deformation of magnesia-partially-stabilized zirconia, Journal of the American Ceramic Society, 76(7):1895 (1993).
  47. Batchelor, W.J., Finlayson, T.R., and Griffiths, J.R., - Thermal expansion measurements on creep tested mg-psz, Thermochimica Acta., 218:113 (1993).

Conference Proceedings

  1. Lestiani, R., Batchelor, W., and Banham, P., - Development of a lint camera system and investigation of its performance on identify lint using image analysis, 66th Appita Annual Conference, Appita, Melbourne, p. 207, (2012).
  2. O'connor, M., Batchelor, W.J., and Garnier, G., - Environmental impact improvement through dynamic modeling of treated urban industrial effluent coupled to urban irrigation, Chemeca 2011, (2011).
  3. Perkins, E.L. and Batchelor, W., - Water diffusion behaviour in paper cellulose structure at different moisture contents studied by nuclear magnetic resonance (nmr), Chemeca 2010, Biggs, M., Ed., Institute of Engineers Australia, Adelaide, p. Paper 376, (2010).
  4. Batchelor, W.J., - Applications of an analytical method to calculate the load distribution along a fibre in a loaded network, 2009 Appita Conference, Appita, p. 295, (2009).
  5. Batchelor, W.J., Sudarno, A., Gujjari, C., and Banham, P., - Fundamental studies of linting in the offset printing of newsprint, Transactions 14th Fundamental Research Symposium, I'Anson, S.J., Ed., Fundamental Research Society, Oxford, p. 1325, (2009).
  6. Batchelor, W., Gras, S., Lee, R., and Wang, S., - Cellulose nanofibre nonwovens, Chemeca 2009, Lou, X. and Ang, M., Eds., Institute of Engineers Australia, Perth, p. Paper 206, (2009).
  7. Sudarno, A., Batchelor, W., Banham, P., and Gujjari, C., - Investigation of the effect of press and paper variables on linting during the offset printing of newsprint, 60th Annual Appita Conference, Appita, p. 25, (2006).
  8. Sudarno, A., Gujjari, C., Rand, S.F., Janko, P., Batchelor, W., and Banham, P., - Comparison of size distributions of lint particles from different printing operations., 59th Appita Annual Conference, Appita, Auckland, New Zealand, p. 279, (2005).
  9. He, J., Batchelor, W.J., and Johnston, R.E., - A microscopic study of fibre-fibre contacts in paper, 57th Appita Annual Conference, Appita, Melbourne, p. 323, (2003).
  10. Batchelor, W.J., Wu, Z., and Johnston, R.E., - Measurement of z-direction moisture transport and shrinkage in the drying of paper, 2002 Appita Conference, Appita, Rotorua, p. 111, (2002).
  11. He, J., Batchelor, W.J., Markowski, R., and Johnston, R.E., - A new approach for quantitative analysis of paper structure at fibre level, 2002 Appita Conference, Appita, Rotorua, p. 81, (2002).
  12. Gross, A., Batchelor, W., Finlayson, T., and Griffiths, J., - The effect of microstructure on the plastic deformation of mg-psz, Science and Technology of Zirconia V, Badwal, S.P.S., Bannister, M.J., and Hannink, R.H.J., Eds., Technomic Publishing Company, p. 371, (1993).
  13. Batchelor, W.J. and Finlayson, T.R., - Analysis of creep-in-tension data on mg-psz, Proceedings of the International Conference on Martensitic Transformations, Monterey Institute for Advanced Studies, p. 713, (1993).

Conference Proceedings - Full conference papers

  1. Naranyan, S., Batchelor, W., and Webley, P.A., - Microporous-mesoporous-macroporous zeolite laminate adsorbents prepared using a papermaking technique, International Paper Physics Conference, Stockholm, p. Accepted full paper, (2012).
  2. O'connor, M., Batchelor, W., and Garnier, G., - The trade-off between water and energy in water recycling of pulp and paper industry effluent, Appita Conference, Appita, Melbourne, p. 128, (2012).
  3. Naranyan, S., Batchelor, W.J., and Webley, P.A., - Advances of zeolites in papermaking to create value added products - a review, 2011 Appita conference, Appita, Rotorua, p. 319, (2011).
  4. Batchelor, W.J., - Modelling paper tensile strength from the stress distribution along fibres in a loaded network, 2008 Progress in Paper Physics Seminar, p. 97, (2008).
  5. Lundin, T., Batchelor, W., and Fardim, P., - Effect of bar edge conditions on fibre trapping in low consistency refining, 62nd Appita Annual Conference, Appita, Rotorua, New Zealand, p. 199, (2008).
  6. Joshi, K.V., Batchelor, W.J., Parker, I.H., and Nguyen, K.L., - A new method for shear bond strength measurement, Proc. International Paper Physics Conference, Batchelor, W.J., Ed., Appita, Gold Coast, p. 7, (2007).
  7. Batchelor, W.J., Kibblewhite, R.P., and He, J., - A new method for measuring rba applied to the page equation for the tensile strength of paper, International Paper Physics conference, Batchelor, W.J., Ed., Appita, Gold Coast, p. 107, (2007).
  8. Lundin, T., Batchelor, W., and Fardim, P., - Estimation of fibre trapping from refiner loadability measurements, International Pulp Refining Seminar 2007, Aho, O., Koskenhely, K., and Paulapuro, H., Eds., Otaniemi, Finland, p. 31, (2007).
  9. Ho, J., Hutton, B., Proctor, J., and Batchelor, W., - Development of a tissue creping test rig, Chemeca 2007, IChemEA, Melbourne, p. 1334, (2007).
  10. Katugampola, P., Loffler, S., Batchelor, W., and Johnston, R.E., - Measurement of water penetration and swelling in a multilayered sheet, 60th Appita Annual Conference, Appita, Melbourne, p. 199, (2006).
  11. Gujjari, C., Batchelor, W., Sudarno, A., and Banham, P., - Estimation of ink tack in offset printing and its relationship to linting in offset printing, International Printing and Graphic Arts Conference (Accepted full paper), Cincinatti, Ohio., (2006).
  12. He, J., Batchelor, W.J., and Johnston, R.E., - An analytical model for number of fibre-fibre contacts in paper and expressions for relative bonded area (rba), 2003 International Paper Physics Conference, Paptac, Victoria, Canada, p. 77, (2003).
  13. Batchelor, W.J., Westerlind, B.S., Hagglund, R., and Gradin, P.A., - Effect of test conditions on measured loads and displacements in zero and short span testing, International Paper Physics Conference, Paptac, Victoria, Canada, p. 115, (2003).
  14. Wathen, R., Westerlind, B., Batchelor, W., and Niskanen, K., - Determining the critical strain in the fracture process zone by different methods, International Paper Physics Conference, Paptac, Victoria, Canada, p. 19, (2003).
  15. Batchelor, W. and Wanigaratne, D., - A new cyclic loading method for measuring paper fracture toughness, Progress in Paper Physics Seminar, Keller, D.S. and Ramarao, B.V., Eds., SUNY-ESF, Skeaneateles Falls, New York, p. 188, (2002).
  16. Wanigaratne, D.M.S., Batchelor, W.J., and Parker, I.H., - Comparison of fracture toughness of paper with tensile properties, 55th Appita Annual Conference Proceedings, Appita, Hobart, p. 229, (2001).
  17. Batchelor, W.J. and Westerlind, B.S., - Determination of paper cross-section stress-strain curves using zero and short span tensile measurements, Proceedings The 3rd Biennial Johan Gullichsen Colloquium, The Finnish Paper Engineers Association, Helsinki, p. 73, (2001).Paper and Presentation
  18. Batchelor, W.J., Conn, A.B., and Parker, I.H., - Comparison of techniques to measure the fibril angle, 53rd Appita Annual General Conference, Rotorua, New Zealand, p. 45, (1999).
  19. Wanigaratne, D.M.S., Batchelor, W.J., Conn, A.B., and Parker, I.H., - Image analysis of plastic deformation in the fracture of paper, 53rd Appita Annual General Conference, Rotorua, New Zealand, p. 759, (1999).
  20. Wu, Z., Batchelor, W.J., and Johnston, R.E., - Development of an online impedance method to measure moisture content of a wet paper web, 53rd Appita Annual General Conference, Rotorua, New Zealand, p. 837, (1999).
  21. Batchelor, W.J., - Determination of load-bearing element length in paper using zero/short span tensile testing, TAPPI International Paper Physics Conference, TAPPI, p. 247, (1999).
  22. Conn, A.B. and Batchelor, W.J., - Conversion of an instron to mechanical testing of single fibres, 52nd Appita Annual General Conference Proceedings, Brisbane, p. 543, (1998).
  23. Long, J.M., Conn, A.B., Batchelor, W.J., and Evans, R., - Comparison of methods to measure fibril angle in wood fibres, 52nd Appita Annual General Conference Proceedings, Brisbane, p. 23, (1998).
  24. French, J., Conn, A., Batchelor, W., and Parker, I., - The effect of fibre fibril angle on some handsheet mechanical properties, 52nd Appita Annual General Conference Proceedings, Brisbane, p. 33, (1998).
  25. Long, J.M., A.B., C., W.J., B., and Evans, R., - Comparison of methods to measure fibril angle in wood fibres, 52nd Appita Annual General Conference Proceedings, Brisbane, p. 23, (1998).
  26. Pleasants, S., Batchelor, W., and Parker, I.H., - Measuring the fibril angle of bleached fibres using micro-raman spectroscopy, 51st Appita Annual General Conference Proceedings, p. 545, (1997).
  27. Batchelor, W. and Ouellet, D., - Estimating forces on fibres in refining, Proceedings 4th International Refining Conference, PIRA International, Leatherhead, U.K., Fiuggi, Italy, p. Paper 2, (1997).
  28. Batchelor, W.J., Kure, K.-A., and Ouellet, D., - Refining and the development of fibre properties, Tappi Papermakers Conference Proceedings, Tappi, Philadelphia, p. 207, (1996).

Conference Proceedings - Abstracts

  1. Joshi, K., Batchelor, W.J., and Rasid, K., - Effect of drying and refining on the fibre-fibre shear bond strength measured through acid exposure, 2011 Progress in Paper Physics Seminar Hirn, U., Ed., TUG, Graz, p. 209, (2011).
  2. Zhang, L., Batchelor, W.J., and Wang, X., - Characterization of cellulose nanofibre nonwoven from natural resource, 2011 China Textile Conference, China Textile Engineering Society, Shanghai, p. 231, (2011).
  3. Su, J., Mosse, W., Sharman, S., Batchelor, W., and Garnier, G., - Engineering sustainable paper strength with polyamideamine epichlorohydrin, Chemeca 2011, vol. Paper 585, Sydney, p. 1, (2011).
  4. Zhang, L., Batchelor, W., Jazaeri, E., Tsuzuki, T., and Wang, X., - Preparation and characterization of cellulose nanofiber paper, 2010 International Conference on Nanotechnology for the Forest Products Industry, Tappi, Finland, (2010).
  5. Batchelor, W.J., - Modelling paper strength from the stress distribution along fibres in a loaded network, Fundamental Research Communications- A subsidiary event to the 14th Fundamental Research Symposium, I'Anson, S.J., Ed., Fundamental Research Society, Oxford, p. 40, (2009).
  6. Batchelor, W., - The zero-span test-what are we measuring?, Euromech Colloquium 486 Deformation and Fracture Processes in Paper and Wood Materials, Sundsvall, Sweden, (2006).
  7. Batchelor, W., Boman, R., He, J., Westerlind, B., Hagglund, R., and Wanigaratne, D., - Review and comparison of methods to measure paper fracture energy, Progress in Paper Physics- A Seminar, Coffin, D.W., Ed., Oxford, OH, p. 39, (2006).
  8. Batchelor, W.J., He, J., and Sampson, W.W., - Measurement and modeling of the extent of fiber contact in paper, Progress in Paper Physics- A Seminar, Coffin, D.W., Ed., Oxford, OH, p. 89, (2006).
  9. He, J., Batchelor, W.J., and Johnston, R., - Comparison of analytical models for the tensile properties of paper with experimental results (abstract), The 2004 Progress in Paper Physics Seminar, Gregersen, O.W., Ed., Trondheim, Norway, p. 43, (2004).
  10. Long, J. and Batchelor, W., - Cyclic loading measurements of the strength and stiffness of single wood pulp fibres (abstract), The 2004 Progress in Paper Physics Seminar, Gregersen, O.W., Ed., Trondheim, Norway, p. 178, (2004).
  11. Batchelor, W.J. and Westerlind, B.S., - Measurement of residual span in zero span testing (abstract), Progress in Paper Physics: A Seminar, Grenoble, France, p. 48, (2000).
  12. Batchelor, W. and Finlayson, T., - Phase analysis of mg-psz ceramics using xrd (abstract), AXAA 93.  The 9th National Schools and Conference of the Australian X-Ray Analytical Association, Brisbane, p. 255, (1993).