Publications‎ > ‎

Paper and nonwoven mechanical properties

Journal articles

  1. Perkins, E.L. and Batchelor, W.J., - Water interaction in paper cellulose fibres as investigated by nmr pulsed field gradient, Carbohydrate Polymers, 87:361 (2012). Paper.
  2. Su, J., Mosse, W.K.J., Sharman, S., Batchelor, W., and Garnier, G., - Paper strength development and recyclability with polyamideamine-epichlorohydrin (pae), Bioresources, 7(1):913 (2012). Paper.
  3. Joshi, K.V., Batchelor, W.J., and Rasd, K., - Investigation of the effect of drying and refining on the fiber-fiber shear bond strength measured using tensile fracture line analysis of sheets weakened by acid gas exposure, Cellulose, 18:1407 (2011).Paper.
  4. Batchelor, W.J., - Applications of an analytical method to calculate the load distribution along a fibre in a loaded network, Appita J., 63(4):287 (2010). Paper.
  5. Batchelor, W.J., - An analytical solution for the load distribution along a fibre in a nonwoven network, Mechanics of Materials, 40(12):975 (2008). Paper.
  6. Batchelor, W., Kibblewhite, R.P., and He, J., - A new method for measuring rba applied to the page equation for the tensile strength of paper, Appita J., 61(4):302 (2008). Paper.
  7. He, J., Batchelor, W.J., and Johnston, R.E., - An analytical model for number of fibre-fibre contacts in paper and expressions for relative bonded area (rba),   J. Mat. Sci., 42:522 (2007). Journal page
  8. Batchelor, W.J., He, J., and Sampson, W.W., - Inter-fibre contacts in random fibrous materials: Experimental verification of theoretical dependence on porosity and fibre width, J. Mat. Sci., 41:8377 (2006). Journal page
  9. Batchelor, W.J. and Kibblewhite, R.P., - Calculation of relative bonded area and scattering coefficient from sheet density and fibre shape, Holzforschung, 60(3):253 (2006). Paper
  10. Batchelor, W.J. and He, J., - A new method for determining the relative bonded area, Tappi J., 4(6):23 (2005). Paper
  11. Wathen, R., Batchelor, W., Westerlind, B., and Niskanen, K., - Analysis of strains in the fracture process zone, Nordic Pulp Paper Res. J., 20(4):393 (2005).Paper
  12. He, J., Batchelor, W.J., and Johnston, R.E., - A microscopic study of fibre-fibre contacts in paper, Appita J., 57(4):292 (2004). Paper.
  13. Batchelor, W.J. and Wanigaratne, D.M.S., - A new cyclic loading method for measuring sheet fracture toughness, Int. J of Fracture, 123(1-2):15 (2003).Paper
  14. He, J., Batchelor, W.J., and Johnston, R., - The behaviour of fibers in wet pressing, TAPPI J., 2(12):27 (2003). Paper
  15. He, J., Batchelor, W.J., Markowski, R., and Johnston, R.E., - A new approach for quantitative analysis of paper structure at the fibre level, Appita J., 56(5):366 (2003). Paper.
  16. Wanigaratne, D.M.S., Batchelor, W.J., and Parker, I.H., - Comparison of fracture toughness of paper with tensile properties, Appita J., 55(5):369 (2002). Paper.
  17. French, J., Conn, A., Batchelor, W., and Parker, I., - The effect of fibre fibril angle on some handsheet mechanical properties, Appita J., 53(3):210 (2000). Paper
  18. Wanigaratne, D.M.S., Batchelor, W.J., Conn, A.B., and Parker, I.H., - Image analysis of plastic deformation in the fracture of paper, Appita J., 53(6):471 (2000). Paper

Conference papers

  1. Batchelor, W.J., Kibblewhite, R.P., and He, J., - A new method for measuring rba applied to the page equation for the tensile strength of paper, International Paper Physics conference, Batchelor, W.J., Ed., Appita, p 107 (2007). Preprint
  2. Joshi, K.V., Batchelor, W.J., Parker, I.H., and Nguyen, K.L., - A new method for shear bond strength measurement, International Paper Physics conference, Batchelor, W.J., Ed., Appita, p 7 (2007). Preprint
  3. Batchelor, W., Boman, R., He, J., Westerlind, B., Hagglund, R., and Wanigaratne, D., - Review and comparison of methods to measure paper fracture energy, Progress in Paper Physics- A Seminar, Coffin, D.W., Ed.,p 39 (2006). Extended abstract. Presentation
  4. Batchelor, W.J., He, J., and Sampson, W.W., - Measurement and modeling of the extent of fiber contact in paper, Progress in Paper Physics- A Seminar, Coffin, D.W., Ed.,p 89 (2006). Extended abstract. Presentation.
  5. Katugampola, P., Loffler, S., Batchelor, W., and Johnston, R.E., - Measurement of water penetration and swelling in a multilayered sheet, 60th Appita Annual Conference, Appita, p 199 (2006). Preprint
  6. He, J., Batchelor, W.J., and Johnston, R., - Comparison of analytical models for the tensile properties of paper with experimental results (abstract), The 2004 Progress in Paper Physics Seminar, Gregersen, O.W., Ed.,p 43 (2004).
  7. He, J., Batchelor, W.J., and Johnston, R.E., - An analytical model for number of fibre-fibre contacts in paper and expressions for relative bonded area (rba), 2003 International Paper Physics Conference, Paptac, p 77 (2003).
  8. He, J., Batchelor, W.J., and Johnston, R.E., - A microscopic study of fibre-fibre contacts in paper, 57th Appita Annual Conference, Appita, p 323 (2003).
  9. Wathen, R., Westerlind, B., Batchelor, W., and Niskanen, K., - Determining the critical strain in the fracture process zone by different methods, International Paper Physics Conference, Paptac, p 19 (2003).
  10. He, J., Batchelor, W.J., Markowski, R., and Johnston, R.E., - A new approach for quantitative analysis of paper structure at fibre level, 2002 Appita Conference, Appita, p 81 (2002).
  11. Batchelor, W. and Wanigaratne, D., - A new cyclic loading method for measuring paper fracture toughness, Progress in Paper Physics Seminar, Keller, D.S. and Ramarao, B.V., Eds., SUNY-ESF, p 188 (2002).
  12. Wanigaratne, D.M.S., Batchelor, W.J., and Parker, I.H., - Comparison of fracture toughness of paper with tensile properties, 55th Appita Annual Conference Proceedings, Appita, p 229 (2001).
  13. Wanigaratne, D.M.S., Batchelor, W.J., Conn, A.B., and Parker, I.H., - Image analysis of plastic deformation in the fracture of paper, 53rd Appita Annual General Conference,p 759 (1999).
  14. French, J., Conn, A., Batchelor, W., and Parker, I., - The effect of fibre fibril angle on some handsheet mechanical properties, 52nd Appita Annual General Conference Proceedings,p 33 (1998).

Others

  1. Batchelor, W.J. - Method and apparatus for determining fracture tougness.Australian Provisional Patent 2002950712 (2002).